{"product_id":"1-part-q-actv™-pa2024™-wash-primer-activator","title":"1 Part Q-ACTV™ PA2024™ Wash Primer Activator","description":"\u003cp\u003e1 Part Q-ACTV™ PA2024™ Wash Primer Activator (1G)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0375\/1979\/files\/QPRIM_MP2054_WASH_PRIMER_V0412.pdf?v=1668966662\" target=\"_blank\"\u003e\u003cstrong\u003eQ-PRIM™ MP2054™ WASH PRIMER\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Safety: Use only NIOSH-approved respirators and personal protection equipment recommended for the product used. Always review the MSDS – Material Safety Data Sheets before use.\u003c\/p\u003e\n\u003cp\u003e2. Recommended Surfaces: Properly cleaned and prepared aluminum or steel. Aluminum: Sand with 180 – 220 grit. Steel: Sand with 180 – 220 grit.\u003c\/p\u003e\n\u003cp\u003e3. Surface Cleaning: Clean with Q-SOLV™ Approved Cleaners \/ Degreasers and sand using power tools to produce a clean bare metal surface and to retain or produce a surface profile. Once cleaned, the surface will be free of all oil, grease, dirt, dust, mill scale, rust, paint, oxide, corrosion products, and any other foreign matter. Re-clean with Q-SOLV™ Approved Cleaners \/ Degreasers.\u003c\/p\u003e\n\u003cp\u003eApply Q-PRIM™ MP2054™ Wash Primer after the substrate has completely dried or flash rusting may occur. Steel flash rusting occurs quickly with ambient relative humidity if not quickly protected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eQ-PRIM™ MP2054™ Wash Primer is a\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003etwo-component\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eprimer that can be sprayed through conventional or HVLP-high volume low pressure or RP-reduced pressure spray equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Ratio:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Part Q-PRIM™ MP2054™ Wash Primer\u003c\/p\u003e\n\u003cp\u003e1 Part Q-ACTV™ PA2024™ Wash Primer Activator\u003c\/p\u003e\n\u003cp\u003eMix thoroughly and strain-activated material prior to use.\u003c\/p\u003e\n\u003cp\u003eClean up: The only clean-up solvent recommended for this product is:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"https:\/\/www.unitedfinish.com\/products\/q-solv-cd4418-spray-gun-cleaner-gl?_pos=1\u0026amp;_sid=0045b3ef5\u0026amp;_ss=r\" href=\"https:\/\/www.unitedfinish.com\/products\/q-solv-cd4418-spray-gun-cleaner-gl?_pos=1\u0026amp;_sid=0045b3ef5\u0026amp;_ss=r\"\u003eQ-SOLV™\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCD4418™ Spray Gun Cleaner\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply .3 to .5 mils dry film thickness DFT. Excessive film build will cause premature failure. Pot life – 6 to 8 hours.\u003c\/p\u003e\n\u003cp\u003eTopcoat within 24 hours.\u003c\/p\u003e\n\u003cp\u003eDo not apply if the temperature is below 55°F or above 110°F or if the surface temperature is within 5°F of the dew point or if humidity exceeds 85%. For the highest, DOI (degree of image) apply a primer surfacer before top coating.\u003c\/p\u003e\n\u003cp\u003eCan be top coated with many types of paint systems.\u003c\/p\u003e\n\u003cp\u003eAlways test before the application or production run. Do not apply when the ambient temperature is below 55°F.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"www.unitedfinish.com\" target=\"_blank\"\u003ewww.unitedfinish.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Best Knowledge ERP","offers":[{"title":"Default Title","offer_id":67815702364480,"sku":"PA2072™ ADVANCED EPOXY ACTIVATOR","price":110.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/buyindasa.com\/no\/products\/1-part-q-actv%e2%84%a2-pa2024%e2%84%a2-wash-primer-activator","provider":"Buy Indasa","version":"1.0","type":"link"}