Spray Gun Setup Guide
Set up your spray gun right the first time. Pick what you're spraying and how big the job is. We'll give you the typical fluid tip size, the right Indasa Mixing System cup and filter, and a direct link to the adapter that fits your gun.
1. What are you spraying?
2. How big is the job?
Quick reference: fluid tip sizes
| Coating | Typical tip size | IMS filter |
|---|---|---|
| Epoxy primer | 1.4–1.6 mm | Clear 190µm |
| 2K urethane primer-surfacer (high build) | 1.7–2.0 mm | Clear 190µm |
| Polyester spray filler | 2.0–2.5 mm | Clear 190µm |
| Waterborne primer | 1.6–1.8 mm | Blue 125µm |
| Sealer | 1.3–1.4 mm | Clear 190µm |
| Solvent basecoat | 1.2–1.3 mm | Clear 190µm |
| Waterborne basecoat | 1.2–1.3 mm | Blue 125µm |
| Clearcoat | 1.3–1.4 mm | Clear 190µm |
| Single-stage urethane | 1.3–1.4 mm | Clear 190µm |
Tip sizes are typical HVLP and compliant-gun recommendations. Your paint's technical data sheet and your gun manufacturer's settings always come first.